The SportDog NoBark SBC-10 activates with Silent Partner™ bark-detection, Dual detection from the dog’s vocal cord and the sound of your dog’s bark. Also built with a rechargeable battery and 2-hour quick charge, the collar can be ready when you need it.
Model |
SBC-10 |
Correction Modes |
Static |
Activation Mode | Vibration & Sound |
Correction Levels | 2 Modes - Progressive and User Select |
Waterproof | Yes |
Dog Size | 3.6kg and Up |
Strap Size | 28cm - 63cm |
Battery | Rechargeable lithium-ion battery |
Bark Collar Weight | 100g |
Dimensions | 69mm x 29mm x 29mm |
For Automatic Stimulation Progressive Correction Mode on SportDOG Rechargeable NoBark SBC-10, the correction starts at the lowest level and automatically increases to the next level if your dog continues barking after 30 seconds up to 10 levels. But if your dog stops barking after 30 seconds, it will reset back to the lowest level.
You can manually set the level of stimulation suitable for your dog's personality. There are 10 levels of stimulation that you can select manually and the collar will release static correction at the level where you set up when your dogs starts to bark. But if your dog stops barking after 30 seconds, it will stop giving correction as well.
The Silent Bark Technology uses dual activation, both sound and vibration coming from your dog simultaneously for more accurate detection and correction. To avoid false activation and develop learning
Perfect for adventurous dogs that love to go swimming. This SportDog Rechargeable SBC-10 is fully protected by DryTek technology that makes this bark collar fully waterproof up to 25 feet of water deep.
The SBC-10 bark collar only used the best rechargeable Lithium-Ion batteries. With just 2 hours of quick charge, you can already use it up to 6 months without worrying of replacing it with another battery.
The SportDOG SBC-10 Bark Collar uses several features designed to shorten the training phase and promote good behaviour:
Important
Mode Switch: Adjusts the operating mode and level of correction your dog receives when barking. This switch is also used to turn the SportDog NoBark SBC-10 on and off.
Sound-Activated Sensor: Distinguishes your dog’s bark.
Contact Points: Send safe correction.
Vibration Sensor Probe: Identifies the vibrations of your dog’s barking.
Display: Shows the current mode of operation based on the colour and the numeric indicator. Displays the condition of the battery (Full, OK, Low).
Charge Port: Receptacle for the battery charger.
Battery Charger: Plugs into a standard wall receptacle for charging the collar.
Be sure to charge the unit before using the Spordog NoBark SBC-10 bark collar for the first time by following the steps labeled below.
The NoBark SBC-10 has a rechargeable battery pack. When the unit shows that the battery is low (battery icon on the display shows 1 bar or less and/or the light flashes red 3 times every 5 seconds) it is time to recharge the unit.
Typical battery life is 3 to 6 months, depending on how frequently your dog barks. Nevertheless, due to greater use during your dog’s training, your first battery charge may not last as long. To save battery life, turn the NoBark SBC-10 off when not in use.
Follow these steps to charge the battery:
1. Remove the NoBark SBC-10 from your dog.
2. Plug the battery charger into a standard household receptacle.
3. Plug the other end of the battery charger into the NoBark SBC-10 charge port. The light will flash the sequence Green-Blue-Red to indicate that charging has started.
4. During charging, keep the NoBark SBC-10 in an open, well-ventilated area. The light will flash red twice every 10 seconds to indicate that charging is active.
5. When charging is complete, the battery charger will automatically shut off, preventing overcharging. The light will flash green twice every 10 seconds to indicate that charging is complete.
Note: The battery should fully charge in less than 4 hours.
6. Remove the battery charger from the charge port. The light will flash the sequence Red-Blue-Green to indicate the unit is no longer charging.
7. Unplug the battery charger.
Note: The NoBark SBC R-E will automatically turn off when the battery charger is connected to it. Thus, following a charge, turn the unit back on before using it.
Note: If the battery pack is very low (i.e. been used too long or stored for an extended period of time) it may take some time for the unit to indicate that charging has started. If the unit does not indicate that it is charging after 1 hour, please contact our Customer Care Center for help at 1-800-732-0144.
The NoBark SBC-10 has two methods of operation. These three modes are designated by the light colour and the display combination. The following table summarizes the three modes and how they are presented.
|
|
|
1 |
Progressive Correction |
Blue/Green light |
3 |
User-Selected Correction |
Blue light/Number indicates the active correction level |
Note: In user-selected mode, constantly begin training at the lowest level of correction (Level 0). Watch how your dog responds, and if necessary, progress to the next correction level.
Note: When the operating mode is changed, the correction level is automatically reset to Level 0.
The NoBark SBC-10 has a single push-button that lets you turn the unit on and off, display the current operating mode, and change the operating mode. The succeeding table defines how to accomplish different tasks.
|
|
|
Turn the collar on |
Press and release the push-button while the unit is off. |
The light will lash green five times and then display the current operating mode as described in the previous page. |
Turn the collar off |
Press the push-button until the display goes blank and the red light comes on. Then, release the push-button.* |
The light will lash red four times and stop operating. |
Display current operating mode |
Press the push-button and hold it for less than 2 seconds before releasing it. |
The unit will display the current operating mode, as described on the previous page, and the battery condition. |
* If you continue to push the button for more than 5 seconds, you will begin changing modes (see page 9).
|
|
|
Change the active operating mode |
1. Press the push-button and hold it for at least 5 seconds. |
- Mode will advance and be displayed as described on page 7. |
* The light will flash every five seconds to indicate the current mode.
Important: The correct fit and location of your NoBark SBC-10 is vital for effective operation. The contact points must have direct contact with your dog’s skin on the underside of his neck.
To guarantee a correct fit, make sure to follow these steps:
1. Ensure the NoBark SBC-10 is off.
2. Begin with your dog standing comfortably.
3. Put the NoBark SBC-10 bark collar high on your dog’s neck close to the ears. Center the contact points under your dog’s neck, touching the skin.
Note: It is sometimes required to trim the hair around the contact points to make sure that contact is consistent.
4. Examine the tightness of the NoBark SBC-10 by putting one finger between the end of a contact point and your dog’s neck. The fit should be snug but not constricting.
5. Let your dog wear the NoBark SBC R-E for several minutes, then recheck the fit. Check the fit again as your dog becomes more comfortable with the NoBark SBC-10.
Important: Certainly not leave the NoBark SBC-10 on for more than 12 consecutive hours.
Important: For comfort, safety and effectiveness of this product please guarantee the following:
A condition called Pressure Necrosis, which is a devitalisation of the skin due to extreme and prolonged contact against the contact points, may occur if the steps above are not followed.
Important: Don’t leave your dog alone the first few times he receives a correction.
Put the NoBark SBC 10 correctly on your dog and wait nearby until he barks. Most dogs will recognize quickly that the NoBark SBC 10 bark collar is disturbing their urge to bark and will relax and stop barking.
As the correction might be startling or astonishing, some dogs may bark at the initial correction.
On infrequent occasions, a dog may get into a bark-correction-bark-correction cycle. If this happens, reassure your dog with calm, soothing tones.
As your dog relaxes, he will realize that if he becomes quiet, he will not receive more corrections. Of the few dogs that have this reaction, it usually arises only the first time they wear the NoBark SBC-10.
You need to notice a decrease in your dog’s barking within the first couple of days that he wears the NoBark SBC R-E. Now, it is necessary to keep in mind the learning procedure remains incomplete.
Dogs will “test” the new learning experience and will increase their efforts to bark. This typically occurs through the second week a dog wears the NoBark SBC-10
If this does occur, remain consistent and do not alter your use of the NoBark SBC-10. You must place the NoBark SBC-10 on your dog in every situation when you expect him to be quiet.
If your dog is not wearing the NoBark SBC-10 he may resume barking and his learning would suffer a setback.
In order to buy additional accessories for your SportDOG™ NoBark SBC R-E, please contact the Customer Care Center at 1-800-732-0144 or visit our website at www.sportdog.com to locate a retailer nearby.
|
|
Replacement Collar |
RFA-162-1 |
Replacement Battery Kit |
RFA-228 |
Will my dog stop barking completely? |
• The NoBark SBC-10 effectively and humanely stops barking when it is worn. It should only be worn during periods of unwanted barking. |
Will another dog’s bark set off the NoBark SBC 10? |
• No |
Is the NoBark SBC-10 safe and humane? |
• Yes. The NoBark SBC-10 is designed to get your dog’s attention, not to punish him. However, the initial correction may startle your dog. |
Will the NoBark SBC-10 work for my dog? |
• The NoBark SBC-10 bark collar is safe and effective for all breeds and sizes of dogs, though it may be too large for dogs under 8 pounds to wear comfortably. |
Can I leave the NoBark SBC-10on my dog all the time? |
• No. Never leave the NoBark SBC-10 on for more than 12 consecutive hours. |
Is it possible for my dog to learn not to bark only when the NoBark SBC-10 is on? |
• Yes. This is best accomplished by placing the NoBark SBC R-E on your dog only in situations where you never want him to bark, and never placing the NoBark SBC-10 on your dog in situations where you find it acceptable for him to bark. |
I have more than one dog, but only one dog with a barking problem. Will it cause problems between the dogs if I keep them together? |
• It should not be a problem, especially if you follow the procedures described in this guide. |
Can I attach a leash to the NoBark SBC-10? |
• No. This can result in pulling the contact points too tightly against your dog’s neck. Attach a leash to a separate, non- metallic collar; making sure the extra collar does not put pressure on the contact points. |
My dog keeps barking (does not respond to the correction). |
• Tighten the NoBark-10 and/or trim your dog’s hair where the contact points touch his neck to ensure good skin contact. |
The SBC R-E collar light is not lashing. |
• Make sure the NoBark SBC-10 bark collar nit is turned on. |
Here at The Dog Line, we guarantee that our prices either match the prices of competitor’s or beat them. We also offer a lot of other Reasons to Buy besides a price match guarantee.
If you see an Australian competitor having lower prices than us, simply fill in the form below with all the details and we’ll beat their price! On top of that, we will give you an *exclusive 10% discount of the difference.
Sample | Calculation | |
Our Price | = | $130 |
Other Price | = | $80 |
Difference | = | $50 |
Discount | 10% of $50 = | $5 |
Final Price for You | = | $75 |
Fill in the form below and we'll contact you for the price match.
The SportDog NoBark SBC-10 activates with Silent Partner™ bark-detection, Dual detection from the dog’s vocal cord and the sound of your dog’s bark. Also built with a rechargeable battery and 2-hour quick charge, the collar can be ready when you need it.
Model |
SBC-10 |
Correction Modes |
Static |
Activation Mode | Vibration & Sound |
Correction Levels | 2 Modes - Progressive and User Select |
Waterproof | Yes |
Dog Size | 3.6kg and Up |
Strap Size | 28cm - 63cm |
Battery | Rechargeable lithium-ion battery |
Bark Collar Weight | 100g |
Dimensions | 69mm x 29mm x 29mm |
For Automatic Stimulation Progressive Correction Mode on SportDOG Rechargeable NoBark SBC-10, the correction starts at the lowest level and automatically increases to the next level if your dog continues barking after 30 seconds up to 10 levels. But if your dog stops barking after 30 seconds, it will reset back to the lowest level.
You can manually set the level of stimulation suitable for your dog's personality. There are 10 levels of stimulation that you can select manually and the collar will release static correction at the level where you set up when your dogs starts to bark. But if your dog stops barking after 30 seconds, it will stop giving correction as well.
The Silent Bark Technology uses dual activation, both sound and vibration coming from your dog simultaneously for more accurate detection and correction. To avoid false activation and develop learning
Perfect for adventurous dogs that love to go swimming. This SportDog Rechargeable SBC-10 is fully protected by DryTek technology that makes this bark collar fully waterproof up to 25 feet of water deep.
The SBC-10 bark collar only used the best rechargeable Lithium-Ion batteries. With just 2 hours of quick charge, you can already use it up to 6 months without worrying of replacing it with another battery.
The SportDOG SBC-10 Bark Collar uses several features designed to shorten the training phase and promote good behaviour:
Important
Mode Switch: Adjusts the operating mode and level of correction your dog receives when barking. This switch is also used to turn the SportDog NoBark SBC-10 on and off.
Sound-Activated Sensor: Distinguishes your dog’s bark.
Contact Points: Send safe correction.
Vibration Sensor Probe: Identifies the vibrations of your dog’s barking.
Display: Shows the current mode of operation based on the colour and the numeric indicator. Displays the condition of the battery (Full, OK, Low).
Charge Port: Receptacle for the battery charger.
Battery Charger: Plugs into a standard wall receptacle for charging the collar.
Be sure to charge the unit before using the Spordog NoBark SBC-10 bark collar for the first time by following the steps labeled below.
The NoBark SBC-10 has a rechargeable battery pack. When the unit shows that the battery is low (battery icon on the display shows 1 bar or less and/or the light flashes red 3 times every 5 seconds) it is time to recharge the unit.
Typical battery life is 3 to 6 months, depending on how frequently your dog barks. Nevertheless, due to greater use during your dog’s training, your first battery charge may not last as long. To save battery life, turn the NoBark SBC-10 off when not in use.
Follow these steps to charge the battery:
1. Remove the NoBark SBC-10 from your dog.
2. Plug the battery charger into a standard household receptacle.
3. Plug the other end of the battery charger into the NoBark SBC-10 charge port. The light will flash the sequence Green-Blue-Red to indicate that charging has started.
4. During charging, keep the NoBark SBC-10 in an open, well-ventilated area. The light will flash red twice every 10 seconds to indicate that charging is active.
5. When charging is complete, the battery charger will automatically shut off, preventing overcharging. The light will flash green twice every 10 seconds to indicate that charging is complete.
Note: The battery should fully charge in less than 4 hours.
6. Remove the battery charger from the charge port. The light will flash the sequence Red-Blue-Green to indicate the unit is no longer charging.
7. Unplug the battery charger.
Note: The NoBark SBC R-E will automatically turn off when the battery charger is connected to it. Thus, following a charge, turn the unit back on before using it.
Note: If the battery pack is very low (i.e. been used too long or stored for an extended period of time) it may take some time for the unit to indicate that charging has started. If the unit does not indicate that it is charging after 1 hour, please contact our Customer Care Center for help at 1-800-732-0144.
The NoBark SBC-10 has two methods of operation. These three modes are designated by the light colour and the display combination. The following table summarizes the three modes and how they are presented.
|
|
|
1 |
Progressive Correction |
Blue/Green light |
3 |
User-Selected Correction |
Blue light/Number indicates the active correction level |
Note: In user-selected mode, constantly begin training at the lowest level of correction (Level 0). Watch how your dog responds, and if necessary, progress to the next correction level.
Note: When the operating mode is changed, the correction level is automatically reset to Level 0.
The NoBark SBC-10 has a single push-button that lets you turn the unit on and off, display the current operating mode, and change the operating mode. The succeeding table defines how to accomplish different tasks.
|
|
|
Turn the collar on |
Press and release the push-button while the unit is off. |
The light will lash green five times and then display the current operating mode as described in the previous page. |
Turn the collar off |
Press the push-button until the display goes blank and the red light comes on. Then, release the push-button.* |
The light will lash red four times and stop operating. |
Display current operating mode |
Press the push-button and hold it for less than 2 seconds before releasing it. |
The unit will display the current operating mode, as described on the previous page, and the battery condition. |
* If you continue to push the button for more than 5 seconds, you will begin changing modes (see page 9).
|
|
|
Change the active operating mode |
1. Press the push-button and hold it for at least 5 seconds. |
- Mode will advance and be displayed as described on page 7. |
* The light will flash every five seconds to indicate the current mode.
Important: The correct fit and location of your NoBark SBC-10 is vital for effective operation. The contact points must have direct contact with your dog’s skin on the underside of his neck.
To guarantee a correct fit, make sure to follow these steps:
1. Ensure the NoBark SBC-10 is off.
2. Begin with your dog standing comfortably.
3. Put the NoBark SBC-10 bark collar high on your dog’s neck close to the ears. Center the contact points under your dog’s neck, touching the skin.
Note: It is sometimes required to trim the hair around the contact points to make sure that contact is consistent.
4. Examine the tightness of the NoBark SBC-10 by putting one finger between the end of a contact point and your dog’s neck. The fit should be snug but not constricting.
5. Let your dog wear the NoBark SBC R-E for several minutes, then recheck the fit. Check the fit again as your dog becomes more comfortable with the NoBark SBC-10.
Important: Certainly not leave the NoBark SBC-10 on for more than 12 consecutive hours.
Important: For comfort, safety and effectiveness of this product please guarantee the following:
A condition called Pressure Necrosis, which is a devitalisation of the skin due to extreme and prolonged contact against the contact points, may occur if the steps above are not followed.
Important: Don’t leave your dog alone the first few times he receives a correction.
Put the NoBark SBC 10 correctly on your dog and wait nearby until he barks. Most dogs will recognize quickly that the NoBark SBC 10 bark collar is disturbing their urge to bark and will relax and stop barking.
As the correction might be startling or astonishing, some dogs may bark at the initial correction.
On infrequent occasions, a dog may get into a bark-correction-bark-correction cycle. If this happens, reassure your dog with calm, soothing tones.
As your dog relaxes, he will realize that if he becomes quiet, he will not receive more corrections. Of the few dogs that have this reaction, it usually arises only the first time they wear the NoBark SBC-10.
You need to notice a decrease in your dog’s barking within the first couple of days that he wears the NoBark SBC R-E. Now, it is necessary to keep in mind the learning procedure remains incomplete.
Dogs will “test” the new learning experience and will increase their efforts to bark. This typically occurs through the second week a dog wears the NoBark SBC-10
If this does occur, remain consistent and do not alter your use of the NoBark SBC-10. You must place the NoBark SBC-10 on your dog in every situation when you expect him to be quiet.
If your dog is not wearing the NoBark SBC-10 he may resume barking and his learning would suffer a setback.
In order to buy additional accessories for your SportDOG™ NoBark SBC R-E, please contact the Customer Care Center at 1-800-732-0144 or visit our website at www.sportdog.com to locate a retailer nearby.
|
|
Replacement Collar |
RFA-162-1 |
Replacement Battery Kit |
RFA-228 |
Will my dog stop barking completely? |
• The NoBark SBC-10 effectively and humanely stops barking when it is worn. It should only be worn during periods of unwanted barking. |
Will another dog’s bark set off the NoBark SBC 10? |
• No |
Is the NoBark SBC-10 safe and humane? |
• Yes. The NoBark SBC-10 is designed to get your dog’s attention, not to punish him. However, the initial correction may startle your dog. |
Will the NoBark SBC-10 work for my dog? |
• The NoBark SBC-10 bark collar is safe and effective for all breeds and sizes of dogs, though it may be too large for dogs under 8 pounds to wear comfortably. |
Can I leave the NoBark SBC-10on my dog all the time? |
• No. Never leave the NoBark SBC-10 on for more than 12 consecutive hours. |
Is it possible for my dog to learn not to bark only when the NoBark SBC-10 is on? |
• Yes. This is best accomplished by placing the NoBark SBC R-E on your dog only in situations where you never want him to bark, and never placing the NoBark SBC-10 on your dog in situations where you find it acceptable for him to bark. |
I have more than one dog, but only one dog with a barking problem. Will it cause problems between the dogs if I keep them together? |
• It should not be a problem, especially if you follow the procedures described in this guide. |
Can I attach a leash to the NoBark SBC-10? |
• No. This can result in pulling the contact points too tightly against your dog’s neck. Attach a leash to a separate, non- metallic collar; making sure the extra collar does not put pressure on the contact points. |
My dog keeps barking (does not respond to the correction). |
• Tighten the NoBark-10 and/or trim your dog’s hair where the contact points touch his neck to ensure good skin contact. |
The SBC R-E collar light is not lashing. |
• Make sure the NoBark SBC-10 bark collar nit is turned on. |
Here at The Dog Line, we guarantee that our prices either match the prices of competitor’s or beat them. We also offer a lot of other Reasons to Buy besides a price match guarantee.
If you see an Australian competitor having lower prices than us, simply fill in the form below with all the details and we’ll beat their price! On top of that, we will give you an *exclusive 10% discount of the difference.
Sample | Calculation | |
Our Price | = | $130 |
Other Price | = | $80 |
Difference | = | $50 |
Discount | 10% of $50 = | $5 |
Final Price for You | = | $75 |
Fill in the form below and we'll contact you for the price match.